48 X RJ-45 Gigabit Ethernet Ports
6 x SFP+ 10GbE Ports for Uplink / Fibre 802.1q VLANs with Dynamic MAC-based, Voice & Surveillance VLAN VLAN Routing & Static Route with DHCP server / relay
Virtual Router Redundancy Protocol*
QoS for Application traffic prioritisation 802.1x RADIUS / TACACS+ Port Authentication with Accounting Voice VLAN for QoS (OUI Mode)
IGMP Snooping & Querying
IPv4 and IPv6 Support with IP Conflict Prevention
Console Port
Technical Specification (UK Hardware Spec.)
Physical Interfaces
48 RJ-45 Ethernet Ports – 10/100/1000Mbps
6 SFP+ Ports – 1000Mbps/10Gbps
Console Port (RJ-45 physical, RS-232 electrical)
Factory Reset Button
Stacking Scan Button – New!
AC Power Socket
DC Backup Power Input – New!
PoE Specification
48-ports 802.3af & 802.3at (High Power) PoE PSE 400 Watts Total Power Budget for PoE
Up To 30 Watts Per Port
Auto Detection of Powered Device (PD) and Consumption
Per Port PoE Status LED Indicators
Alert LED for high PoE Usage Port Power Consumption Monitoring via Web Interface & CLI Circuit Protection to Prevent Power Interference between Ports PoE PD Monitoring & Maintenance Features (per port)
– PoE PD Priority
– Restart PoE PD if not responding to ping – Restart PoE IP Camera if not providing camera output
802.1q Tag-based VLAN
Port-based and MAC-based VLANs
QinQ (Basic)
GVRP – General VLAN Registration Protocol Up to 256 VLANs (out of 4096 VLAN IDs)
QoS
Support 8 priority queues
Port-Based Rate Control (Ingress & Egress)
Priority queue schedule (WRR or Strict Priority)
Network Security
IP Source Guard with ARP inspection Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
Dynamic ARP Inspection
DHCP Snooping with Option 82
– Up To 512 ACL Entries
– Source and destination MAC
Link Aggregation
Combine multiple ports to increase bandwidth
LACP Or Static Setup
Supports traffic load balancing
Forwarding Rate: 160.7Mpps At 64 Bytes
MAC Addresses Supported: 32,000
AAA
RADIUS / TACACS+ Authentication for Management
– Reset To Factory Default Settings
– Ping Check with Mail Alert on disconnection
– VigorConnect
– Vigor Router Switch Management (requires router firmware support)
Firmware Upgrade/Backup By HTTP/HTTPS
HTTP (Non-TLS) can be disabled for increased security
System Reboot
Dual Firmware Image (Active & Backup Firmware) Command Line Interface (CLI) via SSH/Telnet Console Port (RJ45) for CLI management OpenVPN Client with Certificate-based auth SNMP v1, v2c, v3 (with Generic Traps) RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
Hardware Monitor
Remote Monitoring through Web Interface & VigorACS
Hardware Monitor Data Recording & Graphing
Email & LED alert on Fan failure, voltage high/low and overheat
Voltage Monitoring
Smart Fan Control for low noise operation
DHCP Server
– Option 82, 66, 67
802.3 Auto-negotiation
802.3ad Port trunk with LACP
802.1x Port Based Network Access Control
802.1ab Link Layer Discovery Protocol (LLDP)
Operating Requirements
Power Input Requirements: 100-240VAC @ 0.7A
Power Supply: Internal
Maximum Input Power Consumption: 64.2 Watts
Storage Temperature: -20 °C To 70 °C
Operating Humidity: 10% to 90% RH (non-condensing) Storage Humidity: 5% to 90% RH (non-condensing)
Physical Specifications
Dimensions: 440 x 281 x 44 mm (W x D x H)
Rack Mountable: 1U
Weight: 3.95 kg (excluding SFP modules/cables) Brackets included for rack or wall mounting
Reviews
There are no reviews yet.