5 GHz wireless bridge with PoE output that connects at 5+ km distances or seamlessly uplinks to UniFi WiFi.

Note. Cannot be set up standalone and must be managed by a UniFi Console, Official UniFi Hosting, or a Self-Hosted UniFi Network Server. PoE adapter included. PoE+ input required for PoE passthrough.

Dimensions d189.5 x 64.3 mm (d7.4 x 2.5")

WiFi Standard WiFi 5

Spatial Streams 2

Coverage Area 5 km (3.1 mi)

Mounting Locations Wall/Pole

Weatherproofing IPX6

Power Method PoE PoE+ (Required for PoE output)

MIMO 2 x 2

Max. Data Rate 867 Mbps (BW80)

Antenna Gain 19 dBi

Max. TX Power 25 dBm

Max. Conducted TX Power 25 dBm (Combined)

Supported Data Rates 802.11a 6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11n 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)

802.11ac (WiFi 5) 6.5 Mbps to 866.7 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)

Wireless Security WPA2 AES (Always On)

Max. Power Consumption 9W

Supported Voltage Range 42.5—57V DC

Networking Interface (2) GbE RJ45 ports

Antennas Internal

Management (1) PoE in (PoE output not used) (1) Passive PoE output

Wind Loading 69 N at 200 km/h (15.5 lbf at 125 mph)

Mount Material UV-stabilized polycarbonate, stainless steel

Enclosure Material UV-resistant polycarbonate

Pole Mount Diameter 0.8–2.1" (20–53.1 mm)

Button (1) Factory-reset

System LEDs Power, Ethernet, (4) signal strength

Channel Bandwidth 20/40/80 (MHz)

Certifications CE, FCC, IC